網站首頁 編程語言 正文
1. orm讀寫數據
1. 創建
1.1. 創建記錄
user := User{Name: "Jinzhu", Age: 18, Birthday: time.Now()}
db.NewRecord(user) // => 主鍵為空返回`true`
db.Create(&user)
db.NewRecord(user) // => 創建`user`后返回`false`
1.2. 默認值
您可以在gorm tag中定義默認值，然后插入SQL將忽略具有默認值的這些字段，并且其值為空，并且在將記錄插入數據庫后，gorm將從數據庫加載這些字段的值。
type Animal struct {
ID int64
Name string `gorm:"default:'galeone'"`
Age int64
}
var animal = Animal{Age: 99, Name: ""}
db.Create(&animal)
// INSERT INTO animals("age") values('99');
// SELECT name from animals WHERE ID=111; // 返回主鍵為 111
// animal.Name => 'galeone'
1.3. 在Callbacks中設置主鍵
如果要在BeforeCreate回調中設置主字段的值，可以使用scope.SetColumn，例如：
func (user *User) BeforeCreate(scope *gorm.Scope) error {
scope.SetColumn("ID", uuid.New())
return nil
}
1.4. 擴展創建選項
// 為Instert語句添加擴展SQL選項
db.Set("gorm:insert_option", "ON CONFLICT").Create(&product)
// INSERT INTO products (name, code) VALUES ("name", "code") ON CONFLICT;
2. 查詢
// 獲取第一條記錄，按主鍵排序 db.First(&user) //// SELECT * FROM users ORDER BY id LIMIT 1; // 獲取最后一條記錄，按主鍵排序 db.Last(&user) //// SELECT * FROM users ORDER BY id DESC LIMIT 1; // 獲取所有記錄 db.Find(&users) //// SELECT * FROM users; // 使用主鍵獲取記錄 db.First(&user, 10) //// SELECT * FROM users WHERE id = 10;
2.1. Where查詢條件 (簡單SQL)
// 獲取第一個匹配記錄
db.Where("name = ?", "jinzhu").First(&user)
//// SELECT * FROM users WHERE name = 'jinzhu' limit 1;
// 獲取所有匹配記錄
db.Where("name = ?", "jinzhu").Find(&users)
//// SELECT * FROM users WHERE name = 'jinzhu';
db.Where("name <> ?", "jinzhu").Find(&users)
// IN
db.Where("name in (?)", []string{"jinzhu", "jinzhu 2"}).Find(&users)
// LIKE
db.Where("name LIKE ?", "%jin%").Find(&users)
// AND
db.Where("name = ? AND age >= ?", "jinzhu", "22").Find(&users)
// Time
db.Where("updated_at > ?", lastWeek).Find(&users)
db.Where("created_at BETWEEN ? AND ?", lastWeek, today).Find(&users)
2.2. Where查詢條件 (Struct & Map)
注意：當使用struct查詢時，GORM將只查詢那些具有值的字段
// Struct
db.Where(&User{Name: "jinzhu", Age: 20}).First(&user)
//// SELECT * FROM users WHERE name = "jinzhu" AND age = 20 LIMIT 1;
// Map
db.Where(map[string]interface{}{"name": "jinzhu", "age": 20}).Find(&users)
//// SELECT * FROM users WHERE name = "jinzhu" AND age = 20;
// 主鍵的Slice
db.Where([]int64{20, 21, 22}).Find(&users)
//// SELECT * FROM users WHERE id IN (20, 21, 22);
2.3. Not條件查詢
db.Not("name", "jinzhu").First(&user)
//// SELECT * FROM users WHERE name <> "jinzhu" LIMIT 1;
// Not In
db.Not("name", []string{"jinzhu", "jinzhu 2"}).Find(&users)
//// SELECT * FROM users WHERE name NOT IN ("jinzhu", "jinzhu 2");
// Not In slice of primary keys
db.Not([]int64{1,2,3}).First(&user)
//// SELECT * FROM users WHERE id NOT IN (1,2,3);
db.Not([]int64{}).First(&user)
//// SELECT * FROM users;
// Plain SQL
db.Not("name = ?", "jinzhu").First(&user)
//// SELECT * FROM users WHERE NOT(name = "jinzhu");
// Struct
db.Not(User{Name: "jinzhu"}).First(&user)
//// SELECT * FROM users WHERE name <> "jinzhu";2.4. 帶內聯條件的查詢
注意：使用主鍵查詢時，應仔細檢查所傳遞的值是否為有效主鍵，以避免SQL注入
// 按主鍵獲取
db.First(&user, 23)
//// SELECT * FROM users WHERE id = 23 LIMIT 1;
// 簡單SQL
db.Find(&user, "name = ?", "jinzhu")
//// SELECT * FROM users WHERE name = "jinzhu";
db.Find(&users, "name <> ? AND age > ?", "jinzhu", 20)
//// SELECT * FROM users WHERE name <> "jinzhu" AND age > 20;
// Struct
db.Find(&users, User{Age: 20})
//// SELECT * FROM users WHERE age = 20;
// Map
db.Find(&users, map[string]interface{}{"age": 20})
//// SELECT * FROM users WHERE age = 20;2.5. Or條件查詢
db.Where("role = ?", "admin").Or("role = ?", "super_admin").Find(&users)
//// SELECT * FROM users WHERE role = 'admin' OR role = 'super_admin';
// Struct
db.Where("name = 'jinzhu'").Or(User{Name: "jinzhu 2"}).Find(&users)
//// SELECT * FROM users WHERE name = 'jinzhu' OR name = 'jinzhu 2';
// Map
db.Where("name = 'jinzhu'").Or(map[string]interface{}{"name": "jinzhu 2"}).Find(&users)
2.6. 查詢鏈
Gorm有一個可鏈接的API，你可以這樣使用它
db.Where("name <> ?","jinzhu").Where("age >= ? and role <> ?",20,"admin").Find(&users)
//// SELECT * FROM users WHERE name <> 'jinzhu' AND age >= 20 AND role <> 'admin';
db.Where("role = ?", "admin").Or("role = ?", "super_admin").Not("name = ?", "jinzhu").Find(&users)
2.7. 擴展查詢選項
// 為Select語句添加擴展SQL選項
db.Set("gorm:query_option", "FOR UPDATE").First(&user, 10)
//// SELECT * FROM users WHERE id = 10 FOR UPDATE;
2.8. FirstOrInit
獲取第一個匹配的記錄，或者使用給定的條件初始化一個新的記錄（僅適用于struct，map條件）
// Unfound
db.FirstOrInit(&user, User{Name: "non_existing"})
//// user -> User{Name: "non_existing"}
// Found
db.Where(User{Name: "Jinzhu"}).FirstOrInit(&user)
//// user -> User{Id: 111, Name: "Jinzhu", Age: 20}
db.FirstOrInit(&user, map[string]interface{}{"name": "jinzhu"})
//// user -> User{Id: 111, Name: "Jinzhu", Age: 20}
2.9. Attrs
如果未找到記錄，則使用參數初始化結構
// Unfound
db.Where(User{Name: "non_existing"}).Attrs(User{Age: 20}).FirstOrInit(&user)
//// SELECT * FROM USERS WHERE name = 'non_existing';
//// user -> User{Name: "non_existing", Age: 20}
db.Where(User{Name: "non_existing"}).Attrs("age", 20).FirstOrInit(&user)
//// SELECT * FROM USERS WHERE name = 'non_existing';
//// user -> User{Name: "non_existing", Age: 20}
// Found
db.Where(User{Name: "Jinzhu"}).Attrs(User{Age: 30}).FirstOrInit(&user)
//// SELECT * FROM USERS WHERE name = jinzhu';
//// user -> User{Id: 111, Name: "Jinzhu", Age: 20}
2.10. Assign
將參數分配給結果，不管它是否被找到
// Unfound
db.Where(User{Name: "non_existing"}).Assign(User{Age: 20}).FirstOrInit(&user)
//// user -> User{Name: "non_existing", Age: 20}
// Found
db.Where(User{Name: "Jinzhu"}).Assign(User{Age: 30}).FirstOrInit(&user)
//// SELECT * FROM USERS WHERE name = jinzhu';
//// user -> User{Id: 111, Name: "Jinzhu", Age: 30}
2.11. FirstOrCreate
獲取第一個匹配的記錄，或創建一個具有給定條件的新記錄（僅適用于struct, map條件）
// Unfound
db.FirstOrCreate(&user, User{Name: "non_existing"})
//// INSERT INTO "users" (name) VALUES ("non_existing");
//// user -> User{Id: 112, Name: "non_existing"}
// Found
db.Where(User{Name: "Jinzhu"}).FirstOrCreate(&user)
//// user -> User{Id: 111, Name: "Jinzhu"}
2.12. Attrs
如果未找到記錄，則為參數分配結構
// Unfound
db.Where(User{Name: "non_existing"}).Attrs(User{Age: 20}).FirstOrCreate(&user)
//// SELECT * FROM users WHERE name = 'non_existing';
//// INSERT INTO "users" (name, age) VALUES ("non_existing", 20);
//// user -> User{Id: 112, Name: "non_existing", Age: 20}
// Found
db.Where(User{Name: "jinzhu"}).Attrs(User{Age: 30}).FirstOrCreate(&user)
//// SELECT * FROM users WHERE name = 'jinzhu';
//// user -> User{Id: 111, Name: "jinzhu", Age: 20}
2.13. Assign
將其分配給記錄，而不管它是否被找到，并保存回數據庫。
// Unfound
db.Where(User{Name: "non_existing"}).Assign(User{Age: 20}).FirstOrCreate(&user)
//// SELECT * FROM users WHERE name = 'non_existing';
//// INSERT INTO "users" (name, age) VALUES ("non_existing", 20);
//// user -> User{Id: 112, Name: "non_existing", Age: 20}
// Found
db.Where(User{Name: "jinzhu"}).Assign(User{Age: 30}).FirstOrCreate(&user)
//// SELECT * FROM users WHERE name = 'jinzhu';
//// UPDATE users SET age=30 WHERE id = 111;
//// user -> User{Id: 111, Name: "jinzhu", Age: 30}
2.14. Select
指定要從數據庫檢索的字段，默認情況下，將選擇所有字段;
db.Select("name, age").Find(&users)
//// SELECT name, age FROM users;
db.Select([]string{"name", "age"}).Find(&users)
//// SELECT name, age FROM users;
db.Table("users").Select("COALESCE(age,?)", 42).Rows()
//// SELECT COALESCE(age,'42') FROM users;
2.15. Order
在從數據庫檢索記錄時指定順序，將重排序設置為true以覆蓋定義的條件
db.Order("age desc, name").Find(&users)
//// SELECT * FROM users ORDER BY age desc, name;
// Multiple orders
db.Order("age desc").Order("name").Find(&users)
//// SELECT * FROM users ORDER BY age desc, name;
// ReOrder
db.Order("age desc").Find(&users1).Order("age", true).Find(&users2)
//// SELECT * FROM users ORDER BY age desc; (users1)
//// SELECT * FROM users ORDER BY age; (users2)
2.16. Limit
指定要檢索的記錄數
db.Limit(3).Find(&users) //// SELECT * FROM users LIMIT 3; // Cancel limit condition with -1 db.Limit(10).Find(&users1).Limit(-1).Find(&users2) //// SELECT * FROM users LIMIT 10; (users1) //// SELECT * FROM users; (users2)
2.17. Offset
指定在開始返回記錄之前要跳過的記錄數
db.Offset(3).Find(&users) //// SELECT * FROM users OFFSET 3; // Cancel offset condition with -1 db.Offset(10).Find(&users1).Offset(-1).Find(&users2) //// SELECT * FROM users OFFSET 10; (users1) //// SELECT * FROM users; (users2)
eg:
type Info struct {
Id int `json:"id"`
Code string `json:"code"`
HwCode string `json:"hw_code"`
Name string `json:"name"`
Des string `json:"des"`
Created int64 `json:"created"`
Updated int64 `json:"updated"`
BrandId int `json:"brand_id"`
}
func (Info) TableName() string {
return "bike_color"
}
func (o object) QueryInfo2(id int) *Info {
r := new(Info)
o.gDb.Where("id = ?",id).Find(&r)
return r
}
// 列表
func (o object) QueryList2(page, PageSize int) (list []Info, total int) {
o.gDb.Offset((page-1)*PageSize).Limit(PageSize).Find(&list)
total = len(list)
return
}
2.18. Count
獲取模型的記錄數
db.Where("name = ?", "jinzhu").Or("name = ?", "jinzhu 2").Find(&users).Count(&count)
//// SELECT * from USERS WHERE name = 'jinzhu' OR name = 'jinzhu 2'; (users)
//// SELECT count(*) FROM users WHERE name = 'jinzhu' OR name = 'jinzhu 2'; (count)
db.Model(&User{}).Where("name = ?", "jinzhu").Count(&count)
//// SELECT count(*) FROM users WHERE name = 'jinzhu'; (count)
db.Table("deleted_users").Count(&count)
//// SELECT count(*) FROM deleted_users;
2.19. Group & Having
rows, err := db.Table("orders").Select("date(created_at) as date, sum(amount) as total").Group("date(created_at)").Rows()
for rows.Next() {
...
}
rows, err := db.Table("orders").Select("date(created_at) as date, sum(amount) as total").Group("date(created_at)").Having("sum(amount) > ?", 100).Rows()
for rows.Next() {
...
}
type Result struct {
Date time.Time
Total int64
}
db.Table("orders").Select("date(created_at) as date, sum(amount) as total").Group("date(created_at)").Having("sum(amount) > ?", 100).Scan(&results)
2.20. Join
指定連接條件
rows, err := db.Table("users").Select("users.name, emails.email").Joins("left join emails on emails.user_id = users.id").Rows()
for rows.Next() {
...
}
db.Table("users").Select("users.name, emails.email").Joins("left join emails on emails.user_id = users.id").Scan(&results)
// 多個連接與參數
db.Joins("JOIN emails ON emails.user_id = users.id AND emails.email = ?", "jinzhu@example.org").Joins("JOIN credit_cards ON credit_cards.user_id = users.id").Where("credit_cards.number = ?", "411111111111").Find(&user)
2.21. Pluck
將模型中的單個列作為地圖查詢，如果要查詢多個列，可以使用Scan
var ages []int64
db.Find(&users).Pluck("age", &ages)
var names []string
db.Model(&User{}).Pluck("name", &names)
db.Table("deleted_users").Pluck("name", &names)
// 要返回多個列，做這樣：
db.Select("name, age").Find(&users)
2.22. Scan
將結果掃描到另一個結構中。
type Result struct {
Name string
Age int
}
var result Result
db.Table("users").Select("name, age").Where("name = ?", 3).Scan(&result)
// Raw SQL
db.Raw("SELECT name, age FROM users WHERE name = ?", 3).Scan(&result)
2.23. Scopes
將當前數據庫連接傳遞到func(*DB) *DB，可以用于動態添加條件
func AmountGreaterThan1000(db *gorm.DB) *gorm.DB {
return db.Where("amount > ?", 1000)
}
func PaidWithCreditCard(db *gorm.DB) *gorm.DB {
return db.Where("pay_mode_sign = ?", "C")
}
func PaidWithCod(db *gorm.DB) *gorm.DB {
return db.Where("pay_mode_sign = ?", "C")
}
func OrderStatus(status []string) func (db *gorm.DB) *gorm.DB {
return func (db *gorm.DB) *gorm.DB {
return db.Scopes(AmountGreaterThan1000).Where("status in (?)", status)
}
}
db.Scopes(AmountGreaterThan1000, PaidWithCreditCard).Find(&orders)
// 查找所有信用卡訂單和金額大于1000
db.Scopes(AmountGreaterThan1000, PaidWithCod).Find(&orders)
// 查找所有COD訂單和金額大于1000
db.Scopes(OrderStatus([]string{"paid", "shipped"})).Find(&orders)
// 查找所有付費，發貨訂單
2.24. 指定表名
// 使用User結構定義創建`deleted_users`表
db.Table("deleted_users").CreateTable(&User{})
var deleted_users []User
db.Table("deleted_users").Find(&deleted_users)
//// SELECT * FROM deleted_users;
db.Table("deleted_users").Where("name = ?", "jinzhu").Delete()
//// DELETE FROM deleted_users WHERE name = 'jinzhu';
3. 預加載
db.Preload("Orders").Find(&users)
//// SELECT * FROM users;
//// SELECT * FROM orders WHERE user_id IN (1,2,3,4);
db.Preload("Orders", "state NOT IN (?)", "cancelled").Find(&users)
//// SELECT * FROM users;
//// SELECT * FROM orders WHERE user_id IN (1,2,3,4) AND state NOT IN ('cancelled');
db.Where("state = ?", "active").Preload("Orders", "state NOT IN (?)", "cancelled").Find(&users)
//// SELECT * FROM users WHERE state = 'active';
//// SELECT * FROM orders WHERE user_id IN (1,2) AND state NOT IN ('cancelled');
db.Preload("Orders").Preload("Profile").Preload("Role").Find(&users)
//// SELECT * FROM users;
//// SELECT * FROM orders WHERE user_id IN (1,2,3,4); // has many
//// SELECT * FROM profiles WHERE user_id IN (1,2,3,4); // has one
//// SELECT * FROM roles WHERE id IN (4,5,6); // belongs to
3.1. 自定義預加載SQL
您可以通過傳遞func(db *gorm.DB) *gorm.DB（與Scopes的使用方法相同）來自定義預加載SQL，例如：
db.Preload("Orders", func(db *gorm.DB) *gorm.DB {
return db.Order("orders.amount DESC")
}).Find(&users)
//// SELECT * FROM users;
//// SELECT * FROM orders WHERE user_id IN (1,2,3,4) order by orders.amount DESC;
3.2. 嵌套預加載
db.Preload("Orders.OrderItems").Find(&users)
db.Preload("Orders", "state = ?", "paid").Preload("Orders.OrderItems").Find(&users)
4. 更新
4.1. 更新全部字段
Save將包括執行更新SQL時的所有字段，即使它沒有更改
db.First(&user) user.Name = "jinzhu 2" user.Age = 100 db.Save(&user) //// UPDATE users SET name='jinzhu 2', age=100, birthday='2016-01-01', updated_at = '2013-11-17 21:34:10' WHERE id=111;
4.2. 更新更改字段
如果只想更新更改的字段，可以使用Update,?Updates
// 更新單個屬性（如果更改）
db.Model(&user).Update("name", "hello")
//// UPDATE users SET name='hello', updated_at='2013-11-17 21:34:10' WHERE id=111;
// 使用組合條件更新單個屬性
db.Model(&user).Where("active = ?", true).Update("name", "hello")
//// UPDATE users SET name='hello', updated_at='2013-11-17 21:34:10' WHERE id=111 AND active=true;
// 使用`map`更新多個屬性，只會更新這些更改的字段
db.Model(&user).Updates(map[string]interface{}{"name": "hello", "age": 18, "actived": false})
//// UPDATE users SET name='hello', age=18, actived=false, updated_at='2013-11-17 21:34:10' WHERE id=111;
// 使用`struct`更新多個屬性，只會更新這些更改的和非空白字段
db.Model(&user).Updates(User{Name: "hello", Age: 18})
//// UPDATE users SET name='hello', age=18, updated_at = '2013-11-17 21:34:10' WHERE id = 111;
// 警告:當使用struct更新時，FORM將僅更新具有非空值的字段
// 對于下面的更新，什么都不會更新為""，0，false是其類型的空白值
db.Model(&user).Updates(User{Name: "", Age: 0, Actived: false})4.3. 更新選擇的字段
如果您只想在更新時更新或忽略某些字段，可以使用Select,?Omit
db.Model(&user).Select("name").Updates(map[string]interface{}{"name": "hello", "age": 18, "actived": false})
//// UPDATE users SET name='hello', updated_at='2013-11-17 21:34:10' WHERE id=111;
db.Model(&user).Omit("name").Updates(map[string]interface{}{"name": "hello", "age": 18, "actived": false})
//// UPDATE users SET age=18, actived=false, updated_at='2013-11-17 21:34:10' WHERE id=111;
4.4. 更新更改字段但不進行Callbacks
以上更新操作將執行模型的BeforeUpdate,?AfterUpdate方法，更新其UpdatedAt時間戳，在更新時保存它的Associations，如果不想調用它們，可以使用UpdateColumn,?UpdateColumns
// 更新單個屬性，類似于`Update`
db.Model(&user).UpdateColumn("name", "hello")
//// UPDATE users SET name='hello' WHERE id = 111;
// 更新多個屬性，與“更新”類似
db.Model(&user).UpdateColumns(User{Name: "hello", Age: 18})
//// UPDATE users SET name='hello', age=18 WHERE id = 111;
4.5. Batch Updates 批量更新
Callbacks在批量更新時不會運行
db.Table("users").Where("id IN (?)", []int{10, 11}).Updates(map[string]interface{}{"name": "hello", "age": 18})
//// UPDATE users SET name='hello', age=18 WHERE id IN (10, 11);
// 使用struct更新僅適用于非零值，或使用map[string]interface{}
db.Model(User{}).Updates(User{Name: "hello", Age: 18})
//// UPDATE users SET name='hello', age=18;
// 使用`RowsAffected`獲取更新記錄計數
db.Model(User{}).Updates(User{Name: "hello", Age: 18}).RowsAffected
4.6. 使用SQL表達式更新
DB.Model(&product).Update("price", gorm.Expr("price * ? + ?", 2, 100))
//// UPDATE "products" SET "price" = price * '2' + '100', "updated_at" = '2013-11-17 21:34:10' WHERE "id" = '2';
DB.Model(&product).Updates(map[string]interface{}{"price": gorm.Expr("price * ? + ?", 2, 100)})
//// UPDATE "products" SET "price" = price * '2' + '100', "updated_at" = '2013-11-17 21:34:10' WHERE "id" = '2';
DB.Model(&product).UpdateColumn("quantity", gorm.Expr("quantity - ?", 1))
//// UPDATE "products" SET "quantity" = quantity - 1 WHERE "id" = '2';
DB.Model(&product).Where("quantity > 1").UpdateColumn("quantity", gorm.Expr("quantity - ?", 1))
//// UPDATE "products" SET "quantity" = quantity - 1 WHERE "id" = '2' AND quantity > 1;4.7. 在Callbacks中更改更新值
如果要使用BeforeUpdate,?BeforeSave更改回調中的更新值，可以使用scope.SetColumn，例如
func (user *User) BeforeSave(scope *gorm.Scope) (err error) {
if pw, err := bcrypt.GenerateFromPassword(user.Password, 0); err == nil {
scope.SetColumn("EncryptedPassword", pw)
}
}
4.8. 額外更新選項
// 為Update語句添加額外的SQL選項
db.Model(&user).Set("gorm:update_option", "OPTION (OPTIMIZE FOR UNKNOWN)").Update("name, "hello")
//// UPDATE users SET name='hello', updated_at = '2013-11-17 21:34:10' WHERE id=111 OPTION (OPTIMIZE FOR UNKNOWN);
5. 刪除/軟刪除
警告?刪除記錄時，需要確保其主要字段具有值，GORM將使用主鍵刪除記錄，如果主要字段為空，GORM將刪除模型的所有記錄
// 刪除存在的記錄
db.Delete(&email)
//// DELETE from emails where id=10;
// 為Delete語句添加額外的SQL選項
db.Set("gorm:delete_option", "OPTION (OPTIMIZE FOR UNKNOWN)").Delete(&email)
//// DELETE from emails where id=10 OPTION (OPTIMIZE FOR UNKNOWN);
5.1. 批量刪除
刪除所有匹配記錄
db.Where("email LIKE ?", "%jinzhu%").Delete(Email{})
//// DELETE from emails where email LIKE "%jinhu%";
db.Delete(Email{}, "email LIKE ?", "%jinzhu%")
//// DELETE from emails where email LIKE "%jinhu%";
5.2. 軟刪除
如果模型有DeletedAt字段，它將自動獲得軟刪除功能！ 那么在調用Delete時不會從數據庫中永久刪除，而是只將字段DeletedAt的值設置為當前時間。
db.Delete(&user)
//// UPDATE users SET deleted_at="2013-10-29 10:23" WHERE id = 111;
// 批量刪除
db.Where("age = ?", 20).Delete(&User{})
//// UPDATE users SET deleted_at="2013-10-29 10:23" WHERE age = 20;
// 軟刪除的記錄將在查詢時被忽略
db.Where("age = 20").Find(&user)
//// SELECT * FROM users WHERE age = 20 AND deleted_at IS NULL;
// 使用Unscoped查找軟刪除的記錄
db.Unscoped().Where("age = 20").Find(&users)
//// SELECT * FROM users WHERE age = 20;
// 使用Unscoped永久刪除記錄
db.Unscoped().Delete(&order)
//// DELETE FROM orders WHERE id=10;
6. 關聯
默認情況下，當創建/更新記錄時，GORM將保存其關聯，如果關聯具有主鍵，GORM將調用Update來保存它，否則將被創建。
user := User{
Name: "jinzhu",
BillingAddress: Address{Address1: "Billing Address - Address 1"},
ShippingAddress: Address{Address1: "Shipping Address - Address 1"},
Emails: []Email{
{Email: "jinzhu@example.com"},
{Email: "jinzhu-2@example@example.com"},
},
Languages: []Language{
{Name: "ZH"},
{Name: "EN"},
},
}
db.Create(&user)
//// BEGIN TRANSACTION;
//// INSERT INTO "addresses" (address1) VALUES ("Billing Address - Address 1");
//// INSERT INTO "addresses" (address1) VALUES ("Shipping Address - Address 1");
//// INSERT INTO "users" (name,billing_address_id,shipping_address_id) VALUES ("jinzhu", 1, 2);
//// INSERT INTO "emails" (user_id,email) VALUES (111, "jinzhu@example.com");
//// INSERT INTO "emails" (user_id,email) VALUES (111, "jinzhu-2@example.com");
//// INSERT INTO "languages" ("name") VALUES ('ZH');
//// INSERT INTO user_languages ("user_id","language_id") VALUES (111, 1);
//// INSERT INTO "languages" ("name") VALUES ('EN');
//// INSERT INTO user_languages ("user_id","language_id") VALUES (111, 2);
//// COMMIT;
db.Save(&user)
6.1. 創建/更新時跳過保存關聯
默認情況下保存記錄時，GORM也會保存它的關聯，你可以通過設置gorm:save_associations為false跳過它。
db.Set("gorm:save_associations", false).Create(&user)
db.Set("gorm:save_associations", false).Save(&user)
6.2. tag設置跳過保存關聯
您可以使用tag來配置您的struct，以便在創建/更新時不會保存關聯
type User struct {
gorm.Model
Name string
CompanyID uint
Company Company `gorm:"save_associations:false"`
}
type Company struct {
gorm.Model
Name string
}原文鏈接：https://www.cnblogs.com/guyouyin123/p/14115359.html
相關推薦
- 2022-10-14 VSC下編寫Makefile文件時，在終端運行make clean命令時報錯的解決方法
- 2022-09-25 MyBatis實現多表查詢（一對一、一對多）的方式
- 2023-09-18 Mybatis新增數據，存在就更新，不存在就添加
- 2022-02-03 checkbox修改默認樣式
- 2022-11-11 docker修改默認存儲位置圖文教程_docker
- 2023-03-27 python中end="?"的含義及說明_python
- 2022-12-15 C++同步線程實現示例詳解_C 語言
- 2022-10-20 Android?Flutter實現自定義下拉刷新組件_Android
- 最近更新
-
- window11 系統安裝 yarn
- 超詳細win安裝深度學習環境2025年最新版（
- Linux 中運行的top命令 怎么退出？
- MySQL 中decimal 的用法？ 存儲小
- get 、set 、toString 方法的使
- @Resource和 @Autowired注解
- Java基礎操作-- 運算符，流程控制 Flo
- 1. Int 和Integer 的區別，Jav
- spring @retryable不生效的一種
- Spring Security之認證信息的處理
- Spring Security之認證過濾器
- Spring Security概述快速入門
- Spring Security之配置體系
- 【SpringBoot】SpringCache
- Spring Security之基于方法配置權
- redisson分布式鎖中waittime的設
- maven:解決release錯誤：Artif
- restTemplate使用總結
- Spring Security之安全異常處理
- MybatisPlus優雅實現加密？
- Spring ioc容器與Bean的生命周期。
- 【探索SpringCloud】服務發現-Nac
- Spring Security之基于HttpR
- Redis 底層數據結構-簡單動態字符串（SD
- arthas操作spring被代理目標對象命令
- Spring中的單例模式應用詳解
- 聊聊消息隊列，發送消息的4種方式
- bootspring第三方資源配置管理
- GIT同步修改后的遠程分支
提供CDN加速