日本免费高清视频-国产福利视频导航-黄色在线播放国产-天天操天天操天天操天天操|www.shdianci.com

學無先后，達者為師

網站首頁 編程語言 正文

Kubernetes集群模擬刪除k8s重裝詳解_云其它

作者：人生的哲理 ? 更新時間： 2022-12-08 編程語言

一.系統環境

服務器版本 docker軟件版本 CPU架構
CentOS Linux release 7.4.1708 (Core) Docker version 20.10.12 x86_64

二.前言

當我們安裝部署好一套Kubernetes集群，使用一段時間之后可能會有重新安裝Kubernetes集群的需求，本文為了滿足這個需求，模擬重裝Kubernetes集群。

重新安裝Kubernetes集群的前提是已經有一套可以正常運行的Kubernetes集群，關于Kubernetes(k8s)集群的安裝部署，可以查看博客《Centos7 安裝部署Kubernetes(k8s)集群》

三.重裝Kubernetes集群

3.1 環境介紹

Kubernetes集群架構：k8scloude1作為master節點，k8scloude2，k8scloude3作為worker節點

服務器 操作系統版本 CPU架構 進程 功能描述
k8scloude1/192.168.110.130 CentOS Linux release 7.4.1708 (Core) x86_64 docker，kube-apiserver，etcd，kube-scheduler，kube-controller-manager，kubelet，kube-proxy，coredns，calico k8s master節點
k8scloude2/192.168.110.129 CentOS Linux release 7.4.1708 (Core) x86_64 docker，kubelet，kube-proxy，calico k8s worker節點
k8scloude3/192.168.110.128 CentOS Linux release 7.4.1708 (Core) x86_64 docker，kubelet，kube-proxy，calico k8s worker節點

3.2 刪除k8s所有節點(node)

kubectl drain 安全驅逐節點上面所有的 pod，--ignore-daemonsets往往需要指定的,這是因為deamonset會忽略SchedulingDisabled標簽（使用kubectl drain時會自動給節點打上不可調度SchedulingDisabled標簽）,因此deamonset控制器控制的pod被刪除后，可能馬上又在此節點上啟動起來,這樣就會成為死循環.因此這里忽略daemonset.

[root@k8scloude1 ~]# kubectl drain k8scloude3 --ignore-daemonsets 
node/k8scloude3 cordoned
WARNING: ignoring DaemonSet-managed Pods: kube-system/calico-node-wmz4r, kube-system/kube-proxy-84gcx
evicting pod kube-system/calico-kube-controllers-6b9fbfff44-rl2mh
pod/calico-kube-controllers-6b9fbfff44-rl2mh evicted
node/k8scloude3 evicted

k8scloude3變?yōu)镾chedulingDisabled

[root@k8scloude1 ~]# kubectl get nodes 
NAME         STATUS                     ROLES                  AGE   VERSION
k8scloude1   Ready                      control-plane,master   64m   v1.21.0
k8scloude2   Ready                      <none>                 56m   v1.21.0
k8scloude3   Ready,SchedulingDisabled   <none>                 56m   v1.21.0

刪除節點k8scloude3

[root@k8scloude1 ~]# kubectl delete nodes k8scloude3
node "k8scloude3" deleted
[root@k8scloude1 ~]# kubectl get nodes 
NAME         STATUS   ROLES                  AGE   VERSION
k8scloude1   Ready    control-plane,master   65m   v1.21.0
k8scloude2   Ready    <none>                 57m   v1.21.0

其余節點進行類似操作

[root@k8scloude1 ~]# kubectl drain k8scloude2 --ignore-daemonsets 
node/k8scloude2 cordoned
WARNING: ignoring DaemonSet-managed Pods: kube-system/calico-node-bbst4, kube-system/kube-proxy-8wf8t
evicting pod kube-system/coredns-545d6fc579-kgmfl
evicting pod kube-system/calico-kube-controllers-6b9fbfff44-nq79f
evicting pod kube-system/coredns-545d6fc579-dln6p
pod/coredns-545d6fc579-dln6p evicted
pod/coredns-545d6fc579-kgmfl evicted
pod/calico-kube-controllers-6b9fbfff44-nq79f evicted
node/k8scloude2 evicted
[root@k8scloude1 ~]# kubectl drain k8scloude1 --ignore-daemonsets 
node/k8scloude1 cordoned
WARNING: ignoring DaemonSet-managed Pods: kube-system/calico-node-r57vx, kube-system/kube-proxy-zblkg
evicting pod kube-system/coredns-545d6fc579-tgcl4
evicting pod kube-system/calico-kube-controllers-6b9fbfff44-t9k45
evicting pod kube-system/coredns-545d6fc579-l9g7b
pod/calico-kube-controllers-6b9fbfff44-t9k45 evicted
pod/coredns-545d6fc579-tgcl4 evicted
pod/coredns-545d6fc579-l9g7b evicted
node/k8scloude1 evicted
[root@k8scloude1 ~]# kubectl get nodes 
NAME         STATUS                     ROLES                  AGE   VERSION
k8scloude1   Ready,SchedulingDisabled   control-plane,master   66m   v1.21.0
k8scloude2   Ready,SchedulingDisabled   <none>                 58m   v1.21.0
[root@k8scloude1 ~]# kubectl delete nodes k8scloude2
node "k8scloude2" deleted
[root@k8scloude1 ~]# kubectl delete nodes k8scloude1
node "k8scloude1" deleted

此時，k8s集群所有節點都被刪除了

[root@k8scloude1 ~]# kubectl get nodes 
No resources found

3.3 kubeadm初始化

此時重新進行kubeadm初始化，但是報錯，看報錯信息可以發現：端口被占用，配置文件已經存在

[root@k8scloude1 ~]# kubeadm init --image-repository registry.aliyuncs.com/google_containers --kubernetes-version=v1.21.0 --pod-network-cidr=10.244.0.0/16
[init] Using Kubernetes version: v1.21.0
[preflight] Running pre-flight checks
        [WARNING Firewalld]: firewalld is active, please ensure ports [6443 10250] are open or your cluster may not function correctly
        [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
error execution phase preflight: [preflight] Some fatal errors occurred:
        [ERROR Port-6443]: Port 6443 is in use
        [ERROR Port-10259]: Port 10259 is in use
        [ERROR Port-10257]: Port 10257 is in use
        [ERROR FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml]: /etc/kubernetes/manifests/kube-apiserver.yaml already exists
        [ERROR FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml]: /etc/kubernetes/manifests/kube-controller-manager.yaml already exists
        [ERROR FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml]: /etc/kubernetes/manifests/kube-scheduler.yaml already exists
        [ERROR FileAvailable--etc-kubernetes-manifests-etcd.yaml]: /etc/kubernetes/manifests/etcd.yaml already exists
        [ERROR Port-10250]: Port 10250 is in use
        [ERROR Port-2379]: Port 2379 is in use
        [ERROR Port-2380]: Port 2380 is in use
        [ERROR DirAvailable--var-lib-etcd]: /var/lib/etcd is not empty
[preflight] If you know what you are doing, you can make a check non-fatal with `--ignore-preflight-errors=...`
To see the stack trace of this error execute with --v=5 or higher

當我們重新初始化k8s集群的時候，需要清空原先的設置

[root@k8scloude1 ~]# kubeadm reset
[reset] Reading configuration from the cluster...
[reset] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -o yaml'
W0109 16:17:15.936292   53177 reset.go:99] [reset] Unable to fetch the kubeadm-config ConfigMap from cluster: failed to get node registration: failed to get corresponding node: nodes "k8scloude1" not found
[reset] WARNING: Changes made to this host by 'kubeadm init' or 'kubeadm join' will be reverted.
[reset] Are you sure you want to proceed? [y/N]: y
[preflight] Running pre-flight checks
W0109 16:17:17.651795   53177 removeetcdmember.go:79] [reset] No kubeadm config, using etcd pod spec to get data directory
[reset] Stopping the kubelet service
[reset] Unmounting mounted directories in "/var/lib/kubelet"
[reset] Deleting contents of config directories: [/etc/kubernetes/manifests /etc/kubernetes/pki]
[reset] Deleting files: [/etc/kubernetes/admin.conf /etc/kubernetes/kubelet.conf /etc/kubernetes/bootstrap-kubelet.conf /etc/kubernetes/controller-manager.conf /etc/kubernetes/scheduler.conf]
[reset] Deleting contents of stateful directories: [/var/lib/etcd /var/lib/kubelet /var/lib/dockershim /var/run/kubernetes /var/lib/cni]
The reset process does not clean CNI configuration. To do so, you must remove /etc/cni/net.d
The reset process does not reset or clean up iptables rules or IPVS tables.
If you wish to reset iptables, you must do so manually by using the "iptables" command.
If your cluster was setup to utilize IPVS, run ipvsadm --clear (or similar)
to reset your system's IPVS tables.
The reset process does not clean your kubeconfig files and you must remove them manually.
Please, check the contents of the $HOME/.kube/config file.

重新進行kubeadm初始化

[root@k8scloude1 ~]# kubeadm init --image-repository registry.aliyuncs.com/google_containers --kubernetes-version=v1.21.0 --pod-network-cidr=10.244.0.0/16
[init] Using Kubernetes version: v1.21.0
[preflight] Running pre-flight checks
        [WARNING Firewalld]: firewalld is active, please ensure ports [6443 10250] are open or your cluster may not function correctly
        [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [k8scloude1 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 192.168.110.130]
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [k8scloude1 localhost] and IPs [192.168.110.130 127.0.0.1 ::1]
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [k8scloude1 localhost] and IPs [192.168.110.130 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Writing "admin.conf" kubeconfig file
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Starting the kubelet
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[kubelet-check] Initial timeout of 40s passed.
[apiclient] All control plane components are healthy after 64.004984 seconds
[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config-1.21" in namespace kube-system with the configuration for the kubelets in the cluster
[upload-certs] Skipping phase. Please see --upload-certs
[mark-control-plane] Marking the node k8scloude1 as control-plane by adding the labels: [node-role.kubernetes.io/master(deprecated) node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]
[mark-control-plane] Marking the node k8scloude1 as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[bootstrap-token] Using token: 45wtx2.gfb3j9obk0fz663z
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to get nodes
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[kubelet-finalize] Updating "/etc/kubernetes/kubelet.conf" to point to a rotatable kubelet client certificate and key
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy
Your Kubernetes control-plane has initialized successfully!
To start using your cluster, you need to run the following as a regular user:
  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config
Alternatively, if you are the root user, you can run:
  export KUBECONFIG=/etc/kubernetes/admin.conf
You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/
Then you can join any number of worker nodes by running the following on each as root:
kubeadm join 192.168.110.130:6443 --token 45wtx2.gfb3j9obk0fz663z \
        --discovery-token-ca-cert-hash sha256:d390e28ef900f9a17483bb2d230b9e5be76920d128eb020d472c21d594aa278d

按照要求創建目錄和配置文件

[root@k8scloude1 ~]# mkdir -p $HOME/.kube
[root@k8scloude1 ~]# sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
cp：是否覆蓋"/root/.kube/config"？ y
[root@k8scloude1 ~]# sudo chown $(id -u):$(id -g) $HOME/.kube/config

3.4 添加worker節點到k8s集群

接下來把另外的兩個worker節點也加入到k8s集群。

把k8scloude2節點加入k8s集群

#另外兩個節點執行加入集群的命令
[root@k8scloude2 ~]# kubeadm join 192.168.110.130:6443 --token 45wtx2.gfb3j9obk0fz663z --discovery-token-ca-cert-hash sha256:d390e28ef900f9a17483bb2d230b9e5be76920d128eb020d472c21d594aa278d
[preflight] Running pre-flight checks
        [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
error execution phase preflight: [preflight] Some fatal errors occurred:
        [ERROR FileAvailable--etc-kubernetes-kubelet.conf]: /etc/kubernetes/kubelet.conf already exists
        [ERROR Port-10250]: Port 10250 is in use
        [ERROR FileAvailable--etc-kubernetes-pki-ca.crt]: /etc/kubernetes/pki/ca.crt already exists
[preflight] If you know what you are doing, you can make a check non-fatal with `--ignore-preflight-errors=...`
To see the stack trace of this error execute with --v=5 or higher

work節點重新加入k8s集群也需要清空原先的設置

[root@k8scloude2 ~]# kubeadm reset
[reset] WARNING: Changes made to this host by 'kubeadm init' or 'kubeadm join' will be reverted.
[reset] Are you sure you want to proceed? [y/N]: y
[preflight] Running pre-flight checks
W0109 16:22:12.705575   59352 removeetcdmember.go:79] [reset] No kubeadm config, using etcd pod spec to get data directory
[reset] No etcd config found. Assuming external etcd
[reset] Please, manually reset etcd to prevent further issues
[reset] Stopping the kubelet service
[reset] Unmounting mounted directories in "/var/lib/kubelet"
[reset] Deleting contents of config directories: [/etc/kubernetes/manifests /etc/kubernetes/pki]
[reset] Deleting files: [/etc/kubernetes/admin.conf /etc/kubernetes/kubelet.conf /etc/kubernetes/bootstrap-kubelet.conf /etc/kubernetes/controller-manager.conf /etc/kubernetes/scheduler.conf]
[reset] Deleting contents of stateful directories: [/var/lib/kubelet /var/lib/dockershim /var/run/kubernetes /var/lib/cni]
The reset process does not clean CNI configuration. To do so, you must remove /etc/cni/net.d
The reset process does not reset or clean up iptables rules or IPVS tables.
If you wish to reset iptables, you must do so manually by using the "iptables" command.
If your cluster was setup to utilize IPVS, run ipvsadm --clear (or similar)
to reset your system's IPVS tables.
The reset process does not clean your kubeconfig files and you must remove them manually.
Please, check the contents of the $HOME/.kube/config file.

再次把k8scloude2節點加入k8s集群，可以看到k8scloude2節點加入k8s集群成功

[root@k8scloude2 ~]# kubeadm join 192.168.110.130:6443 --token 45wtx2.gfb3j9obk0fz663z --discovery-token-ca-cert-hash sha256:d390e28ef900f9a17483bb2d230b9e5be76920d128eb020d472c21d594aa278d
[preflight] Running pre-flight checks
        [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -o yaml'
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Starting the kubelet
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...
This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.
Run 'kubectl get nodes' on the control-plane to see this node join the cluster.

k8scloude3節點也進行類似操作

[root@k8scloude3 ~]# kubeadm reset
[root@k8scloude3 ~]# kubeadm join 192.168.110.130:6443 
--token 45wtx2.gfb3j9obk0fz663z 
--discovery-token-ca-cert-hash sha256:d390e28ef900f9a17483bb2d230b9e5be76920d128eb020d472c21d594aa278d

查看k8s集群節點狀態

#此時所有節點都顯示Ready狀態
[root@k8scloude1 ~]# kubectl get nodes 
NAME         STATUS   ROLES                  AGE   VERSION
k8scloude1   Ready    control-plane,master   5m    v1.21.0
k8scloude2   Ready    <none>                 63s   v1.21.0
k8scloude3   Ready    <none>                 33s   v1.21.0

3.5 安裝calico

因為我們之前已經安裝過一次k8s集群了，并且calico插件也安裝好了，重裝之后calico是沒有裝的，但是kubectl get nodes的狀態都為Ready狀態，是因為Ready這個狀態已經寫入了etcd數據庫里了，狀態沒更新，所以需要重裝一次calico

[root@k8scloude1 ~]# kubectl apply -f calico.yaml 
configmap/calico-config created
customresourcedefinition.apiextensions.k8s.io/bgpconfigurations.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/bgppeers.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/blockaffinities.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/caliconodestatuses.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/clusterinformations.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/felixconfigurations.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/globalnetworkpolicies.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/globalnetworksets.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/hostendpoints.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/ipamblocks.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/ipamconfigs.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/ipamhandles.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/ippools.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/ipreservations.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/kubecontrollersconfigurations.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/networkpolicies.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/networksets.crd.projectcalico.org created
clusterrole.rbac.authorization.k8s.io/calico-kube-controllers created
clusterrolebinding.rbac.authorization.k8s.io/calico-kube-controllers created
clusterrole.rbac.authorization.k8s.io/calico-node created
clusterrolebinding.rbac.authorization.k8s.io/calico-node created
daemonset.apps/calico-node created
serviceaccount/calico-node created
deployment.apps/calico-kube-controllers created
serviceaccount/calico-kube-controllers created
Warning: policy/v1beta1 PodDisruptionBudget is deprecated in v1.21+, unavailable in v1.25+; use policy/v1 PodDisruptionBudget
poddisruptionbudget.policy/calico-kube-controllers created

現在集群才是完全正常的

[root@k8scloude1 ~]# kubectl get nodes 
NAME         STATUS   ROLES                  AGE     VERSION
k8scloude1   Ready    control-plane,master   9m11s   v1.21.0
k8scloude2   Ready    <none>                 5m14s   v1.21.0
k8scloude3   Ready    <none>                 4m44s   v1.21.0

注意：如果k8s master節點沒有執行kubeadm reset重置命令，只是重置了worker節點，則不需要重新安裝calico

[root@k8scloude1 ~]# kubectl get pods -n kube-system -o wide
NAME                                       READY   STATUS    RESTARTS   AGE     IP                NODE         NOMINATED NODE   READINESS GATES
calico-kube-controllers-6b9fbfff44-4jzkj   1/1     Running   0          3m16s   10.244.251.193    k8scloude3   <none>           <none>
calico-node-bdlgm                          1/1     Running   0          3m16s   192.168.110.130   k8scloude1   <none>           <none>
calico-node-hx8bk                          1/1     Running   0          3m16s   192.168.110.128   k8scloude3   <none>           <none>
calico-node-nsbfs                          1/1     Running   0          3m16s   192.168.110.129   k8scloude2   <none>           <none>
coredns-545d6fc579-7wm95                   1/1     Running   0          11m     10.244.158.65     k8scloude1   <none>           <none>
coredns-545d6fc579-87q8j                   1/1     Running   0          11m     10.244.158.66     k8scloude1   <none>           <none>
etcd-k8scloude1                            1/1     Running   0          12m     192.168.110.130   k8scloude1   <none>           <none>
kube-apiserver-k8scloude1                  1/1     Running   0          12m     192.168.110.130   k8scloude1   <none>           <none>
kube-controller-manager-k8scloude1         1/1     Running   0          12m     192.168.110.130   k8scloude1   <none>           <none>
kube-proxy-599xh                           1/1     Running   0          7m48s   192.168.110.128   k8scloude3   <none>           <none>
kube-proxy-lpj8z                           1/1     Running   0          8m18s   192.168.110.129   k8scloude2   <none>           <none>
kube-proxy-zxlk9                           1/1     Running   0          11m     192.168.110.130   k8scloude1   <none>           <none>
kube-scheduler-k8scloude1                  1/1     Running   0          12m     192.168.110.130   k8scloude1   <none>           <none>

自此，k8s集群重裝完成！

原文鏈接：https://www.cnblogs.com/renshengdezheli/p/16686997.html

欄目分類
最近更新